— Services
Industrial insulation services in Arlington & DFW
Industrial and mechanical insulation for plants, shops and commercial buildings in Arlington and across DFW. Each service has its own page with options, ballpark pricing, and answers to the questions we hear most. Project needs metalwork or concrete too? Our sister shops build it.
Pipe Insulation in Arlington, TX and the DFW Metroplex
Steam, condensate, hot water, thermal oil and process piping across Arlington and the Dallas–Fort Worth Metroplex — insulated with molded sections, joints staggered and sealed, and finished in a metal jacket that survives a plant. From a boiler room with sixty feet of bare header to a process line that runs the length of the building.
View →Tank and Vessel Insulation in Arlington, TX and the DFW Metroplex
Storage tanks, reactors, heat exchangers and indirect-fired vessels across Arlington and the Dallas–Fort Worth Metroplex — insulated with board and batt banded tight to the shell, heads covered, manways kept serviceable, and the whole thing finished in a metal jacket that sheds Texas weather. A tank is the biggest single piece of hot steel in most plants, and it radiates every hour it holds temperature.
View →Autoclave Insulation in Arlington, TX and the DFW Metroplex
Composite-curing and sterilization autoclaves across Arlington and the Dallas–Fort Worth Metroplex — shell and both heads insulated in mineral wool, finished in a metal jacket, with a sewn removable cover on the door because the door has to open every cycle. Built for the people who actually run the vessel: maintenance and facility engineers who know what a bare 300°F shell does to a fuel bill and to the room around it.
View →Removable Insulation Blankets in Arlington, TX and the DFW Metroplex
Valves, flange pairs, manways, exchanger heads, pump casings — the fittings a plant has to open are the ones that end up bare, because hard insulation gets cut off at the first service and never goes back. A sewn removable cover fixes that permanently: off for the wrench, back on in minutes, and nothing goes in the dumpster at turnaround.
View →Metal Jacketing and Cladding in Arlington, TX and the DFW Metroplex
The jacket is the only part of an insulation system the plant ever touches — and the only thing standing between the insulation and the weather, the washdown hose and the forklift. Across Arlington and the Dallas–Fort Worth Metroplex we fabricate and install aluminum, stainless and PVC jacketing over pipe, tanks and vessels: rolled, cut and fitted on our own benches, banded and screwed with the laps shedding water.
View →Cold and Chilled Line Insulation in Arlington, TX and the DFW Metroplex
Chilled water at 42 to 55°F, cold process lines, glycol loops and refrigeration suction — insulated with closed-cell material and a vapor barrier that is actually continuous. On hot pipe, insulation saves fuel. On cold pipe, it is the only thing standing between the line and a ceiling that drips every July.
View →Insulation Removal and Re-Insulation in Arlington, TX and the DFW Metroplex
Insulation that got rained on through a torn jacket, crushed flat by a ladder against the rack, soaked in leaked oil, or pulled off for a repair and never put back — we strip it out, inspect the pipe underneath, and rebuild the run to current practice. Across Arlington and the Dallas–Fort Worth Metroplex, on piping, tanks and equipment.
View →Sister shop
CJMMetals
Metalwork: gates, fences, carports, railings →Based in Arlington, TX · Dallas–Fort Worth Metroplex